On-line coupling of supercritical fluid extraction with high-performance liquid chromatography for the determination of explosives in vapour phases

An investigation into the selectivity of an iminodiacetic acid (IDA) modified silica gel column for transition and heavy metal ions using non-chelating inorganic eluents has been carried out. A number of eluent parameters were investigated to determine the exact retention mechanism taking place and to control selectivity. The parameters studied were eluent ionic strength and the nature of the inorganic salt used, eluent pH and eluent temperature. The results obtained showed how despite certain metal ions exhibiting similar stability constants with the bonded IDA groups, careful control of each of the above parameters, in particular eluent chloride ion concentration and eluent temperature, could result in large changes in selectivity. Optimal conditions for the isocratic and gradient separation of Mg(II), Ca(II), Mn(II), Cd(II), Co(II), Zn(II) and Pb(II) were determined. An isocratic method using a 0.035 M KCl, 0.065 M KNO3 (pH 2.5) eluent was successfully applied to the determination of Mn(II), Cd(II), Co(II) and Zn(II) at concentrations between 20 and 121 microg/l in a freshwater certified reference material (NIST 1640).     

Kinetik der Entstehung des Zinktartrats

Zusammenfassung Aus potentiometrischen Daten wurde die Konstante der Entstehungsgeschwindigkeit des Zinktartrates bei 18° berechnet. Ihr durchschnittlicher Wert beträgt 1,3·10² mol·min^–1 und der Wert der Zerfallsgeschwindigkeitskonstante beläuft sich im Durchschnitt auf 7,5·10^–2 mol·min^–1.     

Effect of selenium oxidation state on cadmium translocation in chamomile plants

Syntheses and spectral characteristics of cadmium(II) compounds (CdSeO₄, CdSeO₃, and Cd(NCSe)₂(nia)₂) containing selenium in oxidation states (VI), (IV), and (-II) are described. In Cd(NCSe)₂(nia)₂, nicotinamide (nia) and selenocyanate anions are bonded to Cd atom as N-donor monodentate ligands. Nicotinamide is coordinated through the ring nitrogen atom. The effects of these selenium compounds as well as Cd(NCS)₂(nia)₂ on the growth and Cd accumulation in roots and shoots of hydroponically cultivated chamomile plants (cultivar Lutea) were studied. In the applied concentration range (12–60 μmol dm⁻³) Cd(NCS)₂(nia)₂ affected neither the length nor the dry mass of roots and shoots. Other compounds applied at 24 μmol dm⁻³ and 60 μmol dm⁻³ significantly reduced dry mass of roots and shoots. Selenium oxidation state in the cadmium compounds affected Cd accumulation in plant organs as well as Cd translocation within the plants, which was reflected in the values of bioaccumulation (BAF) and translocation factors (S/R). Cd amount accumulated by shoots was lower than that in the roots. The highest BAF values determined for Cd accumulation in shoots were obtained with CdSeO₄. Substitution of S with Se in the Cd(NCX)₂(nia)₂ (X = Se or S) caused an increase of Cd translocation into the shoots. Presented at the XVIIIth Slovak Spectroscopic Conference, Spišská Nová Ves, 15–18 October 2006.     

Structural characterization of CeO(2)-ZrO(2)/TiO(2) and V(2)O(5)/CeO(2)-ZrO(2)/TiO(2) mixed oxide catalysts by XRD, Raman spectroscopy, HREM, and other techniques

Structural characteristics of CeO(2)-ZrO(2)/TiO(2) (CZ/T) and V(2)O(5)/CeO(2)-ZrO(2)/TiO(2) (V/CZ/T) mixed oxide catalysts have been investigated using X-ray diffraction (XRD), BET surface area, Raman spectroscopy (RS), and high-resolution transmission electron microscopy (HREM) techniques. The CeO(2)-ZrO(2) (1:1 mole ratio) solid solution was deposited over a finely powdered TiO(2) support by a deposition precipitation method. A nominal 5 wt % V(2)O(5) was impregnated over the calcined (773 K) CZ/T mixed oxide carrier by a wet impregnation technique. The obtained CZ/T and V/CZ/T samples were further subjected to thermal treatments from 773 to 1073 K to understand the dispersion and temperature stability of these materials. In the case of CZ/T samples, the XRD results suggest the formation of different cubic and tetragonal Ce-Zr-oxide phases, Ce(0.75)Zr(0.25)O(2), Ce(0.6)Zr(0.4)O(2), Ce(0.5)Zr(0.5)O(2), and Ce(0.16)Zr(0.84)O(2) in varying proportions depending on the treatment temperature. With increasing calcination temperature from 773 to 1073 K, the intensity of the lines pertaining to cubic Ce(0.6)Zr(0.4)O(2) and Ce(0.5)Zr(0.5)O(2) phases increased at the expense of cubic Ce(0.75)Zr(0.25)O(2), indicating more incorporation of zirconia into the ceria lattice. The TiO(2) was mainly in the anatase form whose crystallite size also increased with increasing treatment temperature. A better crystallization and more incorporation of zirconia into the ceria lattice was noted when CZ/T was impregnated with V(2)O(5). However, no crystalline V(2)O(5) could be seen from both XRD and RS measurements. In particular, a preferential formation of CeVO(4) compound and an intense tetragonal Ce(0.16)Zr(0.84)O(2) phase were noted beyond 873 K. The HREM results indicate, in the case of CZ/T samples, a well-dispersed Ce-Zr-oxide of the size approximately 5 nm over the bigger crystals ( approximately 40 nm) of TiO(2) when treated at 873 K. The exact structural features of these crystals as determined by digital diffraction analysis of experimental images reveal that the Ce-Zr-oxides are mainly in the cubic fluorite geometry and the TiO(2) is in anatase form. A better crystallization of Ce-Zr-oxides ( approximately 8 nm) over the surface of bigger crystals of TiO(2) was noted at 1073 K. A further enhancement in the crystallite size and zirconia-rich tetragonal phase was noted in the case of V/CZ/T samples. Further, the structure of CeVO(4) formed was also clearly identified in conformity with XRD and RS results.     

Extraction distribution of microamounts of cesium in the two-phase water-HCl-nitrobenzene-dibenzo-18-crown-6-hydrogen dicarbollylcobaltate system

Summary Extraction distribution of microamounts of cesium in the water-HCl-nitrobenzene-dibenzo-18-crown-6(L)-hydrogen dicarbollylcobaltate has been investigated. The equilibrium data have been explained assuming that the complexes HL⁺, CsL⁺and CsL_2,⁺are extracted into the organic phase. The values of extraction and stability constants of the species in nitrobenzene saturated with water have been determined.     

The effect of H2S concentration on the corrosion behavior of API 5L X-70 steel

This work presents electrochemical data measured during the corrosion of API 5L X-70 pipeline steel immersed in aqueous environments containing dissolved H₂S. Three different electrolyte were used: a 3 wt% NaCl solution containing 100, 650 and 2,550 ppm of H₂S respectively. The corrosion of steel is described by means of electrochemical impedance spectroscopy. The electrochemical data obtained from the steel monitoring are presented in terms of Nyquist plots. The influence of the total H₂S concentration as well as the effect of temperature on the corrosion of API 5L X-70 steel were also studied. In the presence of H₂S the R_ct values decrease as the H₂S concentration increases.     

Fitting complex potential energy surfaces to simple model potentials: application of the simplex-annealing method

A stochastic method of optimization, which combines simulated annealing with simplex, is implemented to fit the parameters of a simple model potential. The main characteristic of the method is that it explores the whole space of the parameters of the model potential, and therefore it is very efficient in locating the global minimum of the cost function, in addition to being independent of the initial guess of the parameters. The method is employed to fit the complex intermolecular potential energy surface of the dimer of water, using as a reference the spectroscopic quality anisotropic site-site potential of Feller et al. The simple model potential chosen for its reparameterization is the MCY model potential of Clementi et al. The quality of the fit is assessed by comparing the geometry of the minimum, the harmonic frequencies, and the second virial coefficients of the parameterized potential with the reference one. Finally, to prove more rigorously the robustness of this method, it is compared with standard nonstochastic methods of optimization.     

Conformational mobility of thianthrene-5-oxide

[reaction: see text] Data on the apparent dipole moment of thianthrene-5-oxide (1) and (1)H NMR spectra in different solvents support the conformational mobility of 1, which flaps between two limit boat conformations with the sulfinyl group in pseudoequatorial and pseudoaxial positions, respectively. The conformational equilibrium of 1 occurs too fast for the (1)H NMR (500 MHz) time-scale even at -130 degrees C, and the equilibrium constant has not been determined. The apparent dipole moments of 1 in n-hexane and 1,4-dioxane and the (1)H NMR spectra of 1 and the model compounds cis- and trans-thianthrene-5,10-dioxides (2) and thianthrene (5) in different solvents and at various temperatures confirm that the relative position of the conformational equilibrium of 1 is solvent-dependent, and more polar solvents favor the conformation with the sulfoxide group in the pseudoaxial position (1(')(ax)). Variable-temperature (1)H NMR spectra have established the interconversion barrier of trans-2 and confirmed that the conformational equilibrium of cis-2 is strongly displaced toward the conformation with both sulfinyl groups in the pseudoequatorial position. The (1)H NMR data support the transannular interaction of the functional groups in 1 and trans-2.     

Synthesis and structure of cyclopropano-annelated homosesquinorbornene derivatives containing pyramidalized double bonds: evidence for the sterical effect of a cyclopropyl group on the degree of C=C double-bond pyramidalization

[reaction: see text] endo- and exo-2,3,4,7-tetrahydro-1H-1,4-methanobenzocycloheptene-7-carboxylic acid ethyl esters have been synthesized, and their Diels-Alder cycloaddition reactions with maleic anhydride, dimethyl acetylenedicarboxylate and singlet oxygen have been investigated. The X-ray analysis of four adducts indicated the pyramidalization of the central double bond. Density functional theory calculations on the isolated products and model compounds showed excellent agreement between the experimental and theoretical determined butterfly angles. Furthermore, it has been shown that a cyclopropyl group fused to [2.2.2] system decreases significantly the degree of the pyramidalization which is attributed to the steric interactions between the cyclopropyl group and ethano bridge of the norbornene systems. Due to the instability of the bicyclic endoperoxides, their X-ray analysis could not be carried out. DFT calculations on model compounds showed increased bending in the case of the product obtained by the addition of singlet oxygen to endo-2,3,4,7-tetrahydro-1H-1,4-methanobenzocycloheptene-7-carboxylic acid ethyl ester.     

Determination of imazalil by on-line coupled capillary isotachophoresis with capillary zone electrophoresis

A simple, rapid and reproducible capillary isotachophoretic on-line coupled with capillary zone electrophoresis (CITP-CZE) method for the determination of IMz in food packaging extracts and its residues in apples is described. A good separation of the IMZ from other sample constituents was achieved within 15 minutes without any sample clean up. Method characteristics (linearity, accuracy, intra-assay and detection limit) were determined. Less amount of time involved, sufficient sensitivity and low running cost are the important attributes of CITP-CZE method.